USB VAG-COM OBD II KKL 409.1 Diagnostic Cable Interface

A USB OBD II cable interface is usable for ISO9141 and KWP2000 transmission protocol, it performs real-time diagnosis, modify settings and clear / read error conditions on your vehicle. A must have item for any Volkswagen, Audi, Seat or Skoda owner.

Description:

• Support VAG-COM version 409.1 and earlier
• LED light shows cable communication status
• Work with most Volkswagen, Seat, Skoda and Audi models from 1994 onwards
• OBD II style 16 pin plug data link connector
• Connect USB interface to computer or PDA
• Dual-K lines and L-line (KKL interface)
• Cable Length: Approx. 56 inch / 142 cm

Note: This cable does Not work with CAN BUS vehicle

How to Use:

• Download the shareware 409.1 from CD attached to your computer
• Run it and follow the prompts allow it to install by itself
• Connect the interface between the PC and the car
• Turn the car’s ignition switch ON, but do not start the engine
• Start the software program, click "Options", select the correct communications port. Use "Test" to confirm that the program can use the port and find the interface. Then "Save"

Compatible with:

• Audi:A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
• Seat:Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
• Skoda:Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
• VW:Beetle / Bora / Caddy / Corrado / Golf MK 2 / Golf MK 3 / Golf MK 4 / Jetta MK 3 / Jetta MK 4 / Lupo / Passat MK 3 / Passat MK 4 / Polo MK 3 / Polo MK 4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5

Package Included:

• 1 x Car Diagnostic Cable
• 1 x CD Driver

Keywords: OBD II, OBD cable, diagnostic cable, OBD II diagnostic cable